top of page

Project work 2003 to 2005

 

  • Assisted in the development and implementation of “ The Gust Project Principle Contractor’s Construction Work Place Plan” to facilitate the delivery of the project in a safe and timely manner 

  • A 25,000m2 warehouse complete with services, roads, unloading facilities and four packaging palletizers for finished product

  • Extensions to existing buildings to accommodate new services and equipment such as packaging lines

  • The upgrade of the NH3 refrigeration plant from 8,000 tons to 16,000 tons and full automation of the existing plant. This plant is the best example of a modern automated refrigeration system in the brewing group. This also included insulated brine pipe work to supply the brine to loads through out the brewery

  • The installation of a 150m3/hr Reverse Osmosis filtration plant and the removal and decommissioning of the existing anion demineralization plant, complete with upfront sand and carbon filtration system and a finishing activated carbon filtration system. This also included the installation of the water pipe work to deliver the water systems to the plant.

  • The installation of a new water main system for mains water to the plant and the changeover of the old water distribution system to a full recycle water system fed from the water reclamation center.

  • The installation of five 1500 KVA 11kv to 415v power transformers and the distribution system to enable the brewery to go to 5.4 mhl annual production

  • The installation and integration of a 1500 kg/hr CO2 collection and liquefaction system to add to the existing plant of 1500 kg/hr and the services pipe work and equipment to distribute CO2 to the plant.

  • The installation of a 19 MW dual gas fired water tube boiler complete with water treatment system and assorted site wide steam pipe work.

  • The installation of the gantry systems to distribute the different services to all parts of the existing and new brewery.

  • The design of the plant wide process control system consisting of some 200 PLC’s , approximately 400 device network systems, 8 SCADA servers and 75 client installations and the supervision of a plant wide process control system. This project included the development of our site standard PLC code and HMI templates to match that standard PLC code.

  • Total plant documentation and drawing systems for the new and as constructed plant.

 

bottom of page